The HM Digital
DM-2 commercial inline TDS (total dissolved solids) monitor has two probes to measure TDS for feed and product water when used with TDS reverse osmosis
water filtration systems (sold separately), and can be used for applications including automobile and window washing systems, manufacturing, and food processing. The monitor has a 0 to 9999ppm range. The 0 to 999ppm range has a resolution of 1ppm, and the 1000 to 9999 range has a resolution of 10ppm.
DM-2 commercial inline TDS (total dissolved solids) monitor has two probes to measure TDS for feed and product water when used with TDS reverse osmosis water filtration systems (sold separately), and can be used for applications including automobile and window washing systems, manufacturing, and food processing. The monitor has a 0 to 9999ppm range. The 0 to 999ppm range has a resolution of 1ppm, and the 1000 to 9999 range has a resolution of 10ppm. 
The monitor is factory-calibrated to NaCl 342ppm, and is capable of recalibrating each line separately. Shielded cables prevent interference that can cause inconsistent or inaccurate readings. Diagnostic error message features provide troubleshooting assistance. The monitor is 2.6 x 4.6 x 0.7 inches/6.8 x 11.6 x 1.8cm (H x W x D, where H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back). It is powered by 2 AA batteries (included) and has an automatic shut-off after 3 minutes to conserve battery life.
- Inline total dissolved solids (TDS) monitor to measure TDS
levels for feed and product water when used with TDS water
filtration systems for applications including window washing systems, manufacturing, and food processing
- Two probes provide readings from feed and treated water
- Monitor has 0 to 9999ppm range, digital calibration, and shielded sensor cables
- Automatic shut-off after 3 minutes
- 1/4" Mur-lok quick connect fittings
No comments:
Post a Comment