The Big Blue 10 and 20 inch Water Filter, the most popular in recent years, meets all your filtering needs thanks to its large body volume, high flow and heavy sludge removal. Extremely large casing with increased capacity allows for the intake of significant amounts of impurities. Mostly used in single family houses. Mounted behind water meters in urban water or behind hydrophobes on the water from a self shot. The bodies are available both at 10 "and 20" in length.
1 "or 1/2" inner threads are available in the body. Large inlet and outlet openings allow for significantly increased flow rates of liquid passing through the body. This is a great advantage for water with a substantial contamination. This will not cause pressure drop and fast clogging of the filter cartridges. There are 3 types of interchangeable inserts. Cellulose pleated cartridges for multiple use. They can be rinsed and recirculated cyclically. On average, they can last up to 10 times rinsing.
Cartridges made of polypropylene foam and sintered activated carbon. The above cleaners purify the water from mechanical pollution: sand, sediment, algae, mud, gravel, chlorine, etc. The cartridges are replaced on average every 6 months. The Big Blue Water Filter contains a housing that is compatible with a wide range of chemicals and is available with a venting button. High capacity housing is suitable for high bandwidth applications.
The Big Blue Water Filter is assembled using the mounting plate that is included. The mounting plate is a thick corner with 8 holes. 4 holes Φ8 are under the M8 screws, which connect the body to the angle and 4 holes Φ8 under the dowels 12, which screw the plate to the wall. Under bolts and dowels we give 8 washers Φ8. Depending on the degree of water pollution we can combine filters in series. For serial connection use double or triple mounting plates for two or three filters.
No comments:
Post a Comment